Section 6: Setting Up - MacintoshAXIS 540/640 User’s Manual 67You may select either ASCII or either of these binary data protocolsfor your printing within the Macintosh environment, by following thestep by step instructions below:1. Open the Chooser.2. Select a network printer driver, any LaserWriter will do.3. Select the printer port that has a name ending in "_CFG".4. Close the Chooser.5. Open a text editor, e.g. SimpleText.6. Write a text file containing the following:BINARY : YESBINARY_TYPE : TBCPThe first parameter, BINARY, can take the values YES or NO.The second parameter, BINARY_TYPE, can take the values BCPor TBCP. See the technical reference for more information onthese parameters.7. Print the above text file. The settings will be stored permanentlyin the print server.8. Open the Chooser and select the printer port you wish to use forprinting documents.9. Close the Chooser.10. Complete.Other Macintosh Configuration MethodsShould you wish to change the AXIS 540+/542+ default name oramend any of its default parameters from a Macintosh host, there are anumber of configuration methods that you may wish to consider.
