Section 4: Setting Up - Windows48 AXIS 540/640 User’s ManualWindows for WorkgroupsSetup forPeer-to-Peer PrintingFollow these steps to install your AXIS 540/640 for peer-to-peerprinting at a Windows for Workgroups workstation:1. Double-click the AXIS Print Utility icon.2. In the Port menu, click Add.3. In the NPS Port list, select the AXIS 540/640 port to be installed.The port will appear as .LP1, where is AXfollowed by last six digits of your print server numbere.g. AX100086.LP1. However, this alphanumeric name will besuperseded by any new name given to your AXIS 540/640 whenusing AXIS NetPilot.4. Accept or change the suggested Windows port name and type anyrequired comment in the Description field. Make a note of theWindows port name as you will need this later, then click OK toinstall the Windows port.5. In the Port menu, click Connect... to bring up the WindowsPrinters dialog.6. Select a printer driver from the list of Installed Printers (or clickAdd>> to install a new driver), then click Connect...7. Select the Windows port name from step 4 above (this name canbe found at the bottom of the Ports list).8. Click OK to close the Connect dialog, and Close to close Printers.The setup is completed and you can now print through yourAXIS 540/640.Note: o AXIS Print Utility for Windows must be running when you printthrough your AXIS 540/640. We strongly recommend that youcopy the AXIS Print Utility icon into your StartUp folder..
