Axis 5400 User Manual

Also see for 5400+: Specification User guide Installation guide User guide User manual

Axis 5400 User Manual Manual pdf 11 page image

Setup for NetWare AXIS 5400/AXIS 5600 User’s Guide10Setup for NetWareNetWare Using NDPS over IPImportant:Note:Having assigned an IP address to the AXIS 5400/AXIS 5600 as described in Assigningan IP Address, on page 8, you are now ready to install the AXIS 5400/AXIS 5600 forNDPS printing over IP. Follow the instructions below:1. Connect the AXIS 5400/AXIS 5600 to the NetWare network, if it is not alreadyconnected. Refer to Connecting the printer to the Ethernet Network, on page 7 formore information.2. Start the NetWare Administrator. Create an NDPS Manager object, if you do nothave one available.3. Proceed to create the printer object as a public or controlled access printer.Please refer to the appropriate Novell documentation for instructions on creatingNDPS Manager objects and the NDPS printers.Notes:If you want to print in NDPS, make sure that you have NDPS software installed on your NetWarefile server.You can select to install the connected printers as Public or Controlled Access printers.The HP-JETADMIN parameter of the AXIS 5400/AXIS 5600 must be set to YES in order for thecommunication between the AXIS 5400/AXIS 5600 and the NDPS gateway to be enabled.NDPS requires NetWare 4.11, or higher.During the creation of the printer object, you must choose the IP address of the AXIS 5400/AXIS5600.To print using TCP/IP, Axis print server firmware 6.1 or later is required. In order to print usingIPX/SPX, Axis print server firmware 5.51 or later is needed.NetWare