Axis 5400 User Manual

Also see for 5400+: Specification User guide Installation guide User guide User manual

Axis 5400 User Manual Manual pdf 17 page image

Setup for Windows 3.1 & WfW AXIS 5400/AXIS 5600 User’s Guide16Setup for Windows 3.1 & WfWTCP/IP PrintingTo enable TCP/IP printing in Windows 3.1 and Windows for Workgroupsenvironments, it is recommended that you use a shareware LPR spooler that can bedownloaded from ftp://ftp.axis.com/pub/axis/software/prt_srv/utility/wlprs/.NetBIOS/NetBEUI PrintingAXIS Print Utility for Windows is the preferred tool for NetBIOS/NetBEUI printingin Windows 3.1 and Windows for Workgroups environments.Install the AXIS Print Utility for Windows software, if you have not already done so.It can be downloaded from the software\prt_srv\utility\axpuw\1.04 folder on theAXIS Online CD and from the Axis WWW home page at http://www.axis.com/.Peer-to-peer printing - This print method is recommended for smallernetworks and requires that all users install the AXIS Print Utility for Windows ontheir workstations. Follow these steps to install your AXIS 5400/AXIS 5600 forpeer-to-peer printing at a Windows for Workgroups or Windows 3.1 workstation:1. Double-click the AXIS Print Utility icon.2. In the Port menu, click Add. In the NPS Port list, select the AXIS 5400/AXIS5600 port to be installed. The ports appear as .LP1, .LP2,and .CM1, where is either AX followed by the last six digits ofthe AXIS 5400/AXIS 5600 serial number or a name you have previously giventhe AXIS 5400/AXIS 5600, for example AX100B35.LP1 or DevDept.LP1.Note:3. Accept or change the suggested Windows port name, and type any comments inthe Description field. Make a note of the Windows port name as you will needthis later. Click OK to install the Windows port.4. In the Port menu, click Connect to bring up the Windows Printers dialog.5. Select a printer driver from the list of Installed Printers, or click Add>> to installa new driver. Click Connect...6. Select the Windows port name, defined in step 3, from the Ports list.7. Click OK to close the Connect dialog, and Close to close Printers.LP2 and CM1 are not available for the AXIS 5400.Windows