Axis 5400 User Manual

Also see for 5400+: Specification User guide Installation guide User guide User manual

Axis 5400 User Manual Manual pdf 13 page image

Setup for NetWare AXIS 5400/AXIS 5600 User’s Guide12NetWare Queue-based NetWare Printing (Pure IP)Follow the instructions below to install the AXIS 5400/AXIS 5600 in the NetWarePure IP environment:1. Start the Configuration Wizard from the User mode in the AXIS 5400/AXIS5600 Web interface.2. Click your way through the Wizard until reaching the NetWare page. Make surethat the PSERVER_NDS parameter is set. If you want to change the parametervalue or if the parameter value is empty, enter the desired values. The parametervalue must include the tree or the preferred file server you want to login to andthe print server name including the context.3. Use the NetWare Administrator to create the printer, print server and queueobjects in the NDS tree.4. Use the Add Printer Wizard on your work station to install the printer on yourclient. Note that only NDS queue based PSERVER printing is supported. Wheninstalling, choose Network Printer and browse to the queue you have justcreated. Alternatively, choose Local Printer and select the queue you have justcaptured.Any configuration and management of the AXIS 5400/AXIS 5600 can be performedfrom any standard Web browser. Please refer to Using any standard Web browser, onpage 23.Notes:If the PSERVER_NDS parameter includes the name of a tree and not a specific file server,RCONAG6.NLM must be running on at least one file server in the specified tree.If you have both IPX and IP enabled in your network, you can use AXIS NetPilot to install the AXIS5400/AXIS 5600 and to connect print queues. See Queue-based NetWare Printing (IPX), on page 13.Pure IP requires that you run NetWare 5 or higher.