Axis 5400 User Manual
Also see for 5400+: SpecificationUser guideInstallation guideUser guideUser manual
                               | |
Contents
| 
AXIS 5400/AXIS 5600 User’s Guide Basic Installation 7Connecting the printer to the Ethernet NetworkFollow the instructions below to connect a printer to the network via the AXIS5400/AXIS 5600 print server:Caution!1. Make sure that the printer is switched off and that the AXIS 5400/AXIS 5600external power supply is disconnected.2. Locate the serial number, found on the underside label of the AXIS 5400/AXIS5600, and write it down. You will need this number during the networkconfiguration.Note:3. Connect the printer to the LPT1, LPT2, or COM1 port on the AXIS5400/AXIS 5600.Note:4. Connect your AXIS 5400/AXIS 5600 to the network. A category 5 twisted paircable or better must be used for Fast Ethernet networks.5. Switch on the printer and connect the external power supply to the AXIS5400/AXIS 5600. The power indicator light comes on. If the network indicatorstarts to flash, the AXIS 5400/AXIS 5600 is successfully connected to thenetwork.6. Press and release the test button on the AXIS 5400/AXIS 5600 to print a testpage. If the AXIS 5400/AXIS 5600 is correctly connected to the printer, theAXIS 5400/AXIS 5600 internal test page will be printed.Note:The external power supply you are using must be marked with the correct mains voltage! Refer toHardware Inventory, on page 6.Each AXIS 5400/AXIS 5600 Print Server is pre-configured with a unique node address that isidentical to the serial number.LPT2 and COM1 are not available for the AXIS 5400.The AXIS 5600 will print to the first printer it finds on its ports LPT1, LPT2 and COM1, in thatorder.NetWareUNIX WindowsOS/2Macintosh |
Related manuals for Axis 5400+
manualsdatabase
Your AI-powered manual search engine