Axis 5400 User Manual

Also see for 5400+: Specification User guide Installation guide User guide User manual

Axis 5400 User Manual Manual pdf 12 page image

AXIS 5400/AXIS 5600 User’s Guide Setup for NetWare 11NetWare Using NDPS over IPXInstalling the AXIS 5400/AXIS 5600 as a Public Access printer:1. Make sure that the NDPS Gateway is configured to automatically create a publicaccess printer.2. Connect the AXIS 5400/AXIS 5600 to the NetWare network, if it is not alreadyconnected. Refer to Connecting the printer to the Ethernet Network, on page 7 formore information.3. Use the AXIS NetPilot to set the HP_JETADMIN parameter of the AXIS5400/AXIS 5600 to Yes. The HP_JETADMIN parameter must be set to enablecommunication between the AXIS 5400/AXIS 5600 and the NDPS Gateway.Please refer to Using AXIS NetPilot, on page 24.Please refer to the appropriate Novell documentation for instructions on creatingNDPS Manager objects and the NDPS printers.NotesYou can also set the HP_JETADMIN parameter of the of the AXIS 5400/AXIS 5600 to Yes via anystandard web browser. Please refer to Using any standard Web browser, on page 23.The Public Access print servers are immediately available for everyone on the network.The Axis Gateway will appear in NetWare 5.1 and later releases. To use the Axis Gateway withearlier versions of NetWare, you can download the Axis Gateway Configuration utility fromwww.axis.com.To print using TCP/IP, Axis print server firmware 6.1 or later is required. In order to print usingIPX/SPX, Axis print server firmware 5.51 or later is needed.NetWare