Adding Printers in WindowsAXIS 5400+ / AXIS 5600+ User’s Manual 25Client/Server Printing Select Network printer instead of Local Printer in Step 2 above if yourprint server has already been installed by the administrator on anothercomputer. Follow the instructions in the Add Printer Wizard to completethe installation.Important!Alternative Method forLPR PrintingIf you wish to print over LPR but do not wish to install Print Services forUnix you can do this by changing the printing protocol after havinginstalled the printer using the Standard TCP/IP method, see “Windows2000/XP/2003 - Add Printer Wizard” on page 21 for instructions.Once the printer is installed, follow these instructions to change theprinting protocol:1. Go to Start | Settings | Printers.2. Double-click the installed printer.3. Select Properties from the Printer menu.4. Click the Ports tab.5. Click the Configure Port button.6. Click the LPR radio button and enter the queue name (PR1, PR2...).7. Click OK to finish.Windows NT - Microsoft LPR MonitorIf you have not already done so, you should perform the TCP/IP basicsetup procedures prior to installing a printer for LPR printing.Preparing forLPR PrintingIn the Control Panel, double-click the Network icon. Select the Servicestab. If the TCP/IP Printing entry appears, then TCP/IP is already installed.Close the Network folder and go on to Installing an LPR printer, below.First, prepare for LPR printing:1. Open the Control Panel and double-click the Network icon.2. Select Protocols.3. Add TCP\IP Protocol.4. Select Services.5. Add Microsoft TCP\IP Printing.• Make sure that the Automatically detect and install my Plug and Play printer checkboxis not checked• Press F1 to access the Windows online help system if you need additional help wheninstalling a printer/print server using this method.
