Updating the FirmwareAXIS 5400+ / AXIS 5600+ User’s Manual 79Section 9 Updating the FirmwareUpgrading the FirmwareYou can upgrade the AXIS 5400+/AXIS 5600+ firmware using one of thefollowing methods:• AXIS ThinWizard (TCP/IP)• From the print server’s internal Web pages (TCP/IP)• FTP (TCP/IP)Note:Upgrading from thePrint Server’s InternalWeb PagesFollow these instructions to upgrade the firmware of your print serverfrom its internal Web pages (flash loading over the Web):1. Open your Web browser, enter the IP address of your print server andpress Enter. (See “Using a Web Browser for Print Server Management” onpage 82 for detailed instructions on accessing your Axis print server onthe Web).2. From the Admin mode, click the Firmware Upgrade button. From here youcan upgrade your print server with the latest available firmware.Upgrading usingAXIS ThinWizardAXIS ThinWizard 3.0 is a tool that enables batch upgrading of severalprint servers and can be used for upgrading the print server’s firmware inTCP/IP networks.Follow the instructions below to upgrade your print servers using AXISThinWizard:1. Log in to AXIS ThinWizard.2. Open the Network Group that contains the print server to be upgraded.3. Click the Firmware button. The Firmware Wizard starts.4. Browse through the upgrading tips and click Next > when you are done.Select Latest Available Version. Click Next >.5. Select the servers you want to upgrade, by checking the correct upgradeboxes. Click Next >.6. Enter the default User ID and Password of the servers you selected in theprevious step. Select whether you want AXIS ThinWizard to verify thepassword immediately or when the upgrading job has started, by checkingthe appropriate box. Click Next >.Updating instructions are supplied with the firmware release notes.
