Configuration PossibilitiesAXIS 5500 / AXIS 5550 User’s Manual 85You select your desired conversion filter by setting the Character SetConversion (PRx_CSET.) parameter. The output from the conversion filter isalways IBM PC Set 2 (Code Page 437), and this is the character set the printermust be set up for.Example:In order to direct print jobs to the printer connected to the AXIS 5500/AXIS5550, you should assign the host to a separate logical printer, and install acharacter set conversion filter.Follow the instructions below to change the conversion filter:1. From the print server’s internal Web page, select Admin | LogicalPrinters.2. Select the PR1 tab.3. Set the parameter Physical Port to USB1.4. Set the parameter Character Set Conversion to ISO>IBM.5. Click the OK button.6. Select the PR2 tab.7. Set the parameter Physical Port to USB1.8. Set the parameter Character Set Conversion to DEC>IBM.9. Click the OK button.The ISO 8859-2 printer data that is sent to logical printer PR1 converts to IBMPC Set 2 and is printed on USB1. Similarly, the DEC printer data that is sent tological printer PR2 converts to IBM PC Set 2 and is printed on USB1.Adding Strings Beforeand After Print JobsThese string functions provide a way to send printer control commands beforeand after each print job. They may be specified individually for each logicalprinter.All strings are entered as hexadecimal byte values.Example:Follow the instructions below to add a string after the print job:1. From the print server’s internal Web page, select Admin | LogicalPrinters.2. Select the PR5 tab.Your network contains a host using the character set ISO 8859-2 and a hostusing the character set DEC.Assume that the logical printer PR5 is configured as a PostScript printer andthat you want to append the PostScript End of File character (hex 04) aftereach print job.
