NetWareUNIX WindowsOS/2MacintoshAXIS 560/660 User’s Manual Section 9: Management & Configuration 109Using a Web browserOnce you have established the AXIS 560/660 in the TCP/IPenvironment, as described in Assigning an IP address on page 30, youare free to access the AXIS 560/660 Web pages from any Java enabledWeb browser.The Web interface of the AXIS 560/660 is divided into two modes ofoperation, User mode and Admin mode.User In User mode, you have no rights to change any parameter settings.However, if you have access rights to the Admin mode, you canchange some of the basic parameters from User mode via theConfiguration Wizard. This mode is intended for regular users whoare only interested in using the print server's interface for checkingprint jobs or viewing printer properties. If you want to change anyother of the print server's settings, you must enter the Admin mode.Admin When in Admin mode, you have access to all the print server'sparameters and you can change them to your liking. This mode isintended for network administrators and is password protected toprevent unauthorized changing of the print server parameters.Note: ❏ If the ROOT_PWD parameter is set to pass, which is the defaultvalue, you have access to the User mode as well as the Adminmode.Accessing theWeb PagesFollow the steps below to access the internal home page of the AXIS560/660. The browser used in the following example is NetscapeNavigator 4.3.1. Start your Web browser.2. From the File menu, select Open Page...
