Axis 560 User Manual

Also see for AXIS 560: Specification User manual User manual User manual User guide

Contents

Axis 560 User Manual Manual pdf 51 page image

NetWareAXIS 560/660 User’s Manual Section 4: Setting Up - NetWare 51Basic Queue-based Printing (Pure IP)Axis print servers with software version 6.0 or later allow users to printin a Pure IP environment using traditional queue-based printing. Ifyou prefer using NDPS as your printing method, please refer to Setupusing NDPS, on page 44.In the NetWare Pure IP environment, you must use the NetWareAdministrator to create the printer, print server and queue objects.Installing theAXIS 560/660Follow the instructions below to install the AXIS 560/660 in theNetWare Pure IP environment:1. Start the Configuration Wizard from the User mode in the AXIS560/660 Web interface.2. Click your way through the Wizard until reaching the NetWarepage. Make sure that the PSERVER_NDS parameter is set. If youwant to change the parameter value or if the parameter value isempty, enter the desired values. The parameter value must includethe tree or the preferred file server you want to login to and theprint server name including the context. The syntax of thePSERVER_NDS parameter is described in PSERVER_NDSparameter, on page 52.3. Use NetWare Administrator to create and link the printer, printserver and queue objects in the NDS tree.4. Use the Add Printer Wizard to install the printer on your client.Note that only NDS queue based PSERVER printing issupported.Any configuration and management of the AXIS 560/660 can beperformed from any standard Web browser. Please refer to Using a Webbrowser, on page 109.In Pure IP environments, the AXIS 560/660 supports NDS queuebased PSERVER printing or NDPS printing. Refer to Queue-basedPrinting Methods, on page 53 alternatively Setup using NDPS, on page44.