MacintoshSection 7: Setting Up - Macintosh AXIS 560/660 User’s Manual86Section 7 Setting Up - MacintoshHaving connected the AXIS 560 to your network, this section nowdescribes how to set up your AXIS 560 for printing in Macintoshenvironments using AppleTalk.If you intend to operate your AXIS 560 in a multiprotocolenvironment, you should also proceed to the other relevant sections inthis manual, namely:Section 4 Setting Up - NetWare, on page 43Section 5 Setting Up - Windows, on page 54Section 6 Setting Up - OS/2, on page 80Section 8 Setting Up - UNIX, on page 92Note: ❏ The AXIS 660 does not support printing in the Macintoshenvironment.Installation Using the Chooser WindowBasic Configuration Basic configuration in AppleTalk is performed simply by opening theChooser window and selecting a printer.You can change the default name of your AXIS 560 or any of defaultparameters by editing the config file. To access the config file from aMacintosh, you can use:• any Java enabled Web browser• FTP using MacTCP, Fetch or AnarchieIn order to use any of the methods, you must assign an IP address tothe AXIS 560 as described in Setting Parameters, on page 90.
