NetWareUNIX WindowsOS/2MacintoshSection 11: Upgrading the Software AXIS 560/660 User’s Manual148Upgrading the Firmware SoftwareYou can upgrade the AXIS 560/660 Flash memory using one of thefollowing methods:• AXIS ThinWizard (TCP/IP)• FTP (TCP/IP)• AXIS NetPilot Upgrade Wizard (IPX/SPX)Note: ❏ Updating instructions are also supplied with the software update.Upgrading usingAXIS ThinWizardAXIS ThinWizard is a tool that enables batch upgrading of severalprint servers and should be used for upgrading the flash memory inTCP/IP networks.You must assign the AXIS 560/660 with an IP address, as described inAssigning an IP address, on page 30, before you can use this upgradingmethod.Follow the instructions below to upgrade your print servers usingAXIS ThinWizard:1. Click the Manage Network button in the AXIS ThinWizardmain menu.2. Select a network group from the drop-down list. You can onlyupdate the servers that are included in the selected network group.3. All AXIS servers included in the network group appear. Click theFirmware button to start the Upgrade Wizard.4. Follow the instructions that are presented to you to complete theinstallation.Refer to Using AXIS ThinWizard, on page 115, for more informationabout AXIS ThinWizard.
