NetWareUNIX WindowsOS/2MacintoshAXIS 5600+ User’s Manual Section 1: Introduction 11How to use itInstallation andIntegrationThe installation of the AXIS 5600+ and its integration into thenetwork is performed using the appropriate Axis client software,provided on the AXIS Product CD and the Axis Communicationsweb site:• AXIS Print System (Windows 95/98, NT4.0 and 2000)• AXIS Print Monitor (Windows NT 3.5x)• AXIS Print Utility for Windows (Windows 3.1 and WfW)• AXIS NetPilot™ (NetWare - IPX)• AXIS Print Utility for OS/2• axinstall (UNIX)• AXIS Gateway Configuration UtilityNotes: ❏ The AXIS 5600+ can be installed in the Macintosh environmentwithout any Axis client software.❏ The AXIS 5600+ can be installed in NetWare - Pure IPenvironments with the NetWare Administrator.Configuration andManagementAs the AXIS 5600+ comprises a built-in Web server, it can beconfigured and managed directly from its internal Web pages, usingHTTP over TCP/IP. Access to the AXIS 5600+ via a Web browseroffers you a platform-independent management tool that is suitablefor all supported network environments.In TCP/IP networks you can also use AXIS ThinWizard, whichprovides you with remote management capabilities for your AXISThinServer devices.If your network does not support TCP/IP, you can use AXIS NetPilotto configure and manage the AXIS 5600+. AXIS NetPilot supportscommunication via IPX/SPX and NetBIOS/NetBEUI.
