MacintoshSection 7: Setting Up - Macintosh AXIS 5600+ User’s Manual74Section 7 Setting Up - MacintoshHaving connected the AXIS 5600+ to your network, this section nowdescribes how to set up your AXIS 5600+ for printing in Macintoshenvironments using AppleTalk.If you intend to operate your AXIS 5600+ in a multiprotocolenvironment, you should also proceed to the other relevant sections inthis manual:Section 5 Setting Up - NetWare, on page 54Section 4 Setting Up - Windows, on page 34Section 6 Setting Up - OS/2, on page 68Section 8 Setting Up - UNIX, on page 80Installation Using the Chooser WindowBasic Configuration Basic configuration in AppleTalk is performed simply by opening theChooser window and selecting a printer.You can change the default name of your AXIS 5600+ or any ofdefault parameters by editing the config file. To access the config filefrom a Macintosh, you can use:• any Java enabled Web browser• FTP using MacTCP, Fetch or AnarchieIn order to use any of the methods, you must assign an IP address tothe AXIS 5600+ as described in Setting Parameters, on page 78.
