WindowsAXIS 5600+ User’s Manual Section 4: Setting Up - Windows 53Client-Server Printing:Client SetupFollow these steps to use your AXIS 5600+ for client-server printing ata Windows for Workgroups client:1. In the Control Panel, select Printers.2. Select a printer driver from the list of Installed Printers, or clickAdd>> to install a new driver. Click Connect...3. Select Network... in the Device Name list, select a local port(LPT1 - LPT3) to redirect to your network printer.4. In the Show Shared Printers on list, select the server from ServerSetup above.5. In the Shared Printers list, select the printer you want to use.6. Click OK, OK and Close.7. Exit the Control Panel.The client setup is completed and you can now print through yourAXIS 5600+.Windows Clients using LANtasticFrom any Windows client, the AXIS 5600+ can also be used fornetwork printing in LANtastic environments.LANtastic users can use the AXIS Utilities in exactly the same manneras described in the preceding Windows sections, using a choice of Axisutility software that is guided by the type of Windows clientemployed:• Refer to AXIS Print Utility for Windows Overview, on page 48, ifyou are using a Windows for Workgroups client.• Refer to AXIS Print Monitor Overview, on page 43, if you areusing a Windows 95, Windows 98 or Windows NT client.Note: ❏ Make sure that your LANtastic client is running the desiredprinting protocols.
