Axis 5600+ User Manual

Also see for 5600+: Specification User guide Installation guide User guide User manual

Contents

Axis 5600+ User Manual Manual pdf 144 page image

NetWareUNIX WindowsOS/2MacintoshSection 12: Test Button AXIS 5600+ User’s Manual144Section 12Test ButtonThe test button is located on the front right hand side of the AXIS5600+ and is used for:• Printing a test page, checking the connection to the printer.• Printing a parameter list, showing the AXIS 5600+ currentsettings.• Resetting the AXIS 5600+ parameters to the factory defaultsettings.The Test Page Press the test button once to print a test page. If the test page prints,the parallel interface is functioning correctly. The printed Test Pagecontains basic information about the AXIS 5600+. It is recommendedthat you print a test page every time you have connected the AXIS5600+ to a printer.Note: ❏ The test page is printed on LPT1 by default. If you want to printthe test page on LPT2 or COM1 instead, you should set theInternal Printout Destination parameter to LPT2 respectivelyCOM1.The Parameter List Press the test button twice to print a parameter list showing thecurrent AXIS 5600+ settings. This list provides comprehensive detailsof all the parameters and their current status. Refer to13 - The Parameter List, on page 146.If you want to change any of the parameters, use one of the methodsthat are described inSection 9 Management & Configuration, on page 96.Note: ❏ The parameter list is printed on LPT1 by default. If you want toprint the parameter list on LPT2 or COM1 instead, you shouldset the Internal Printout Destination parameter to LPT2respectively COM1.