OS/2Section 6: Setting Up - OS/2 AXIS 5600+ User’s Manual68Section 6 Setting Up - OS/2Having connected the AXIS 5600+ to your network, as described inConnecting a printer to the Ethernet Network, on page 19, this sectionnow describes how to set up your AXIS 5600+ for printing in theOS/2 environment.Continue with the instructions presented in the table below:If you intend to operate your AXIS 5600+ in a multiprotocolenvironment, you should also proceed to the other relevant sections inthis manual:Section 5 Setting Up - NetWare, on page 54Section 4 Setting Up - Windows, on page 34Section 7 Setting Up - Macintosh, on page 74Section 8 Setting Up - UNIX, on page 80PrintingprotocolSee ...TCP/IP TCP/IP Printing, on page 69NetBIOS/NetBEUI NetBIOS/NetBEUI Printing, on page 70
