NetWareSection 5: Setting Up - NetWare AXIS 5600+ User’s Manual54Section 5 Setting Up - NetWareThis section describes how to continue the installation of the AXIS5600+ in the NetWare environment. Identify which transportprotocol you are running on your network and which installationmethod you should use. Continue the installation by selecting theappropriate installing instructions from the table below:If you intend to operate your AXIS 5600+ in a multi-protocol, mixedenvironment, you should also proceed to the other relevant sections inthis manual, namely:Section 4 Setting Up - Windows, on page 34Section 6 Setting Up - OS/2, on page 68Section 7 Setting Up - Macintosh, on page 74Section 8 Setting Up - UNIX, on page 80InstallationmethodTransportprotocol ActionNDPS TCP/IPIPX/SPXSee Setup using NDPS, on page 55Proceed with Installing the AXIS 5600+ in an NDPS environments, onpage 55.Queue basedprintingIPX/SPXBasicConfigurationTo install using the AXIS NetPilot Installation Wizard, see Basic Setupwith AXIS NetPilot, on page 58.IPX/SPXAdvancedconfigurationIf you need a more advanced installation that is not covered by the AXISNetPilot Installation Wizard, continue with Advanced Installation usingAXIS NetPilot, on page 61.Pure IP See Basic Queue-based printing over IP, on page 64
