Using the AXIS 7100 AXIS 7100 User’s Manual100Notes:Changing the Name of the Scanned Image Files.To change the name of the scanned image file perform theseinstructions from the AXIS 7100 control panel and keyboard:1. Select one or more file destinations.Example:2. Press Tab and use the Left and Right arrows on the keyboardto navigate in the menu list. The AXIS 7100 display will showthe following message with the default name or the previouslyentered name for that specific file.Note:3. Edit the file name using the keyboard.4. When you are finished press Enter and the AXIS 7100 willreturn to the previous state so that you can change otherscanning properties and proceed as described in “Sending toDestinations” on page 91.• The e-mail subject will appear in the list of e-mail subjects and can bemade permanent by the administrator. See “Specifying Destinations”on page 59 for details or contact the administrator.• You can only add one temporary e-mail subject to the list. Any tem-porary e-mail subject will be overwritten.Send to: +1Accounting DeptEnter file name:Default nameYou can also use the keyboard shortcut Ctrl s.
