Axis 7100 User Manual
Also see for 7100: User guide
                                                                                                                                                                                     | |
Contents
| 
Configuring the AXIS 7100 AXIS 7100 User’s Manual44Services Overview The table below provides an overview of information and servicesavailable from this pageUsing the Wizard The Wizard provides a convenient way to set up the AXIS 7100in your networking environment. Follow the instructions belowto configure the supported networking protocols:1. Click Network Settings.2. Click Wizard to have the AXIS 7100 guide you throughthe configuration procedures for each of the supportednetwork protocols.3. Click Close.Button DescriptionWizard Guides the user through the setup procedures for the fol-lowing protocols - TCP/IP, E-mail (SMTP), the ExternalAddress book and printing.Note: You cannot set up all of the supported protocolswith one pass of the Wizard. After completing one proto-col, you then return to the Network Settings Wizard pagewhere you can optionally proceed with another protocol.Detailed View Displays the Protocols page that allows all of the sup-ported protocols to be set up within a single dialog.Restart Server Restarts the AXIS 7100. LED indicators flash during star-tup and self test. When they have stopped and the Net-work indicator starts flashing to indicate networkactivity, the unit is ready for use. New configuration set-tings will then become active.Note: Clicking Restart deletes all temporary destinationand profiles.View Settings Lists the current parameter settings in the configurationfile. |
Related manuals for Axis 7100
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine