Using the AXIS 7100 AXIS 7100 User’s Manual98Notes:Adding Temporary ProfilesIf you have tried all the available profiles but are still notsatisfied with the result of your scanned image, you can add atemporary profile from the Web browser interface.1. Start the Web browser.Note:2. Enter the name or IP address of your AXIS 7100 on thelocation/address line.Example:3. This brings you to the AXIS 7100 Home Page. Click Profiles.4. The table lists the available profiles. Click New Profile andspecify your settings. If you place a document in the scanningdevice, you can click Scan to monitor the results.Note:• Only the five most-recently added temporary destinations will appearin the destination list. Contact your Administrator if you want to adda destination permanently.• All temporary destinations are erased when the AXIS 7100 is shutdown or re-started.The Administrator might not allow the user to add temporary profiles.http://172.16.253.80The Administrator can disable the option for users to add temporaryprofiles in which case the New Profile button will not appear.
