AXIS 7100 User’s Manual Troubleshooting 141FTP Follow these steps to restore the default settings using FTP:1. Log in to the AXIS 7100 with the command ftp address>, where is the name or IPaddress assigned to your AXIS 7100.2. You will be prompted for user id and password. Use the userid root, which has the default password pass.3. Issue the command get defaults to restore the defaultsettings. The unit now restarts automatically.4. Log out using the command quit, bye or exit depending onyour FTP version.The AXIS 7100 will now restart with the factory default settings.Front Panel Indicator ConditionsThe Power LED is hardware controlled and should alwaysremain on when power is connected to the AXIS 7100. Theremaining LEDs are all software controlled.Normal Conditions This table shows the front panel indicators during normalconditions:Event StatusLEDBusy LED NetworkLEDRemarksPower up On On On Initial power to unitOn Off Off Memory testFlash On Off Self test in progressOn Off Flash Network LED flashes when net-work traffic is presentSending On On FlashIdle On Off Flash Network LED flashes when net-work traffic is presentFlash loading YellowFlashBlink Blink During Flash loading, the Net-work LED blinks quickly
