Section 3: Setup for NetWareAxis NPS 650 User’s Manual 17Print Server Mode (Automatic)The setup procedure involves adding a print server and linking it to oneor more print queues. Both steps are carried out in PCONSOLE.Add a Print Server Follow these steps to add a print server to your NetWare environment:1. Log in to a file server from a client workstation.2. Start PCONSOLE.3. NetWare 4.xx only: Press to switch to Bindery Mode.4. Select Print Server Information (3.xx) or Print Servers (4.xx).5. Press to add a new Print Server.6. Enter the Print Server Name: AXIS (see notes below)< nnnnnn> are the last six digits of the NPS 650 serial number.7. Press Escape to return to the Main Menu.Repeat this procedure for each file server using the NPS 650.Notes: 1. If the serial number of your NPS 650 is 000231480061, then thedefault name is AXIS480061. The serial number is found on the labelat the back of the NPS 650.2. You may change the default name using AXCFG, the Axis Configura-tion Software. This must be done before running PCONSOLE.3. The print server name is case insensitive in print server mode. BothAXIS480061 and Axis480061 are valid default print server names.
