Axis NPS 650 User Manual
                                                                                 | |
Contents
| 
Section 4: Setup for WindowsAxis NPS 650 User’s Manual 37Windows NT - LPD printingThis section describes how to set up a Windows NT Server (ver. 3.5 orlater) for LPD printing over the TCP/IP protocol.Install the TCP/IPProtocol StackIn the Control Panel, click the Network icon. If the TCP/IP Protocolentry appears, then TCP/IP is already installed. Close the Network folderand skip to Installing a Printer below.Follow these steps to install the TCP/IP protocol stack:1. In the Network folder, select Add Software.2. Select TCP/IP Protocol and Related Components, then click OK.3. Make sure that the following boxes are checked:• Connectivity Utilities• TCP/IP Printing Support• FTP Server Services4. Click OK to complete the installation.Installing aPrinter1. In the Control Panel, click the Print Manager.2. In the Printer menu, select Create Printer.3. In the Printer Name field, type a name for your printer.4. Choose a printer driver suitable for your printer.5. In the Print to field, select Other...6. In the Print Destinations dialog, choose LPR Port, then click OK. TheAdd LPR Compatible Printer dialog now appears.7. In the Name or Address field, type the IP address or the alias name ofyour NPS 650.Note: If you use an alias name, this must be defined in the hosts file onyour server prior to the installation. This file is normally located in/winnt35/system32/drivers/etc/hosts.8. In the Name of Printer on the Machine field, type the logical printernumber you want to use (e.g. pr1), then click OK.9. Click OK to complete the installation. |
Related manuals for Axis NPS 630
manualsdatabase
Your AI-powered manual search engine