Section 5: Setup for OS/238 Axis NPS 650 User’s ManualSection 5Setup for OS/2The basic configuration in the OS/2 environment is done using the AxisPrint Utility for OS/2 included on the disk supplied with the NPS 650. Itcomprises four steps:1. Activate the NetBEUI protocol (if not already activated).2. Install the Axis Print Utility for OS/2.3. Install the NPS 650 using the Axis Print Utility.4. Create print queues to be serviced by the NPS 650.Before configuring your LAN Server/LAN Manager system, you maywant to configure the NPS 650 (e.g. logical printer definitions). This isdone using the AXCFG software on the disk supplied with the NPS 650.On the disk you will find a text file called read.me, containing installationinstructions for AXCFG in the IBM OS/2 environment.Before you begin: • Make sure that the NPS 650 is powered on and attached to thenetwork.• Have the serial number found on the back of the NPS 650available.• Any network configuration should always involve the networkmanager.
