Programming DUODMX GATEWAY34 BAB TECHNOLOGIE GmbH DUODMX GATEWAY5.5EXTENSIONS MENUThe specific settings for the DUODMX GATEWAY are made in theExtensions menu at the DUODMXGateway extension. Here, the device is connected with group addresses or EnOcean profiles, IPaddresses are assigned and configuration data are transmitted. Moreover, it is possible to search fordevices in the network, to activate the DMX preview and to switch between master and slave operation.5.5.1 SELECTING THE DEVICE VARIANTBefore making the specific settings of the DUODMX GATEWAY, the device variant must be selected.When selecting theExtensions menu for the first time, the following options appear:Figure 30: Selecting the device variantSelect the correspondingbus type for your device variant. Overview of bus types / device variants:(The marking on the front side shows which device variant you have.)KNX/BMX is for the following device types:DUODMX GATEWAY Standalone (item no. 12041)DUODMX GATEWAY IP (item no. 12011)DUODMX GATEWAY KNX (item no. 12021)KNX/BMX SR is for the following device types:DUODMX GATEWAY IP SR (item no. 12111)DUODMX GATEWAY KNX SR (item no. 12121)EnOcean is for the following device type:DUODMX GATEWAY EnOcean (item no. 12031).WLAN is for the following device types:DUODMX GATEWAY Standalone WLAN (item no. 12041w)DUODMX GATEWAY IP WLAN (item no. 10211w)WLAN SR is for the following device types:DUODMX GATEWAY IP SR WLAN (item no. 12111w)Once you have selected the device type, the configuration window for the corresponding technology /bus type opens up. This selection is displayed once after the first access of theDUO-DMX Gatewayextension.
