BAB TECHNOLOGIE DUODMX Series Manual
                                                                           | |
Contents
| 
DUODMX GATEWAYDUODMX GATEWAY BAB TECHNOLOGIE GmbH 71 INTRODUCTIONDMX (Digital Multiplex) is a control protocol in the event technology and therefore has a solid, reliableand simple design. The standard in its current form has existed since 1990. Due to its popularity, itoffers a wide range of functions at low acquisition costs.The DUODMX GATEWAY has a network interface (LAN and WLAN, depending on the variant) and twoindependently configurable DMX outputs (DMX worlds) with 512 channels each, allowing you tocontrol, for example, two rooms/areas separately.The DUODMX GATEWAY can be operated as a DMX master or slave. The gateway sends DMX packets inmaster mode and receives them in slave mode.Nine different device variants position the DUODMX GATEWAY ideally for usage in almost any requiredscenario. The device is used as DMX gateway for KNX® or EnOcean® systems but can also be operatedas a standalone device – straight with a native App for iOS® and Android® smartphones for particularlyeasy operation.The professional configuration software not only enables you to dim individual channels, but also toprogram complex sequences.The DUODMX GATEWAY is highly suitable for subsequent installation as a device installed in the ceiling.A corresponding adapter is available for top DIN rail installation.In addition to the recessed ceiling version, the DUODMX GATEWAY is also available as REG (Modulardevice (REG) housing 4 units).2 THE GATEWAYThe DUODMX GATEWAY is a ceiling installation device, and its compact size also enables specificinstallation situations. The REG variant (Modular device housing), on the other hand, is for installation indistribution boxes. The device has 2 separate DMX interfaces which are controlled separately.Specifications:Power supply: Power over Ethernet (PoE) (via RJ-45 except REG variant) Terminal: 12-32VDC Power consumption: <= 1.2WMechanical data: Assembly: Ceiling installation / DIN rail adapter:Modular device housing 4 MWDIN rail EN 50022 – 35x7.5 Dimensions (W x H x D) in mm:Ceiling installation without fastening lugs: 50x26x116with fastening lugs: 50x26x146Modular device housing 70x90x63Interfaces (model-dependent): KNX via terminal (twisted pair) Network via RJ45 connection Wireless network via external SMA antenna (except REG variant) EnOcean via external SMA antenna (except REG variant) 2xDMX 512 terminal, conductor cross-section: 1.5mm² Input feeler terminal, conductor cross-section: 1.5mm² |
Related manuals for BAB TECHNOLOGIE 12011
manualsdatabase
Your AI-powered manual search engine