DUODMX GATEWAYDUODMX GATEWAY BAB TECHNOLOGIE GmbH 37Figure 34: Creating group addressesObject types: 1 bit: DPT 1.001 (EIS 1 Switch), value: [0.1] 4 bit: DPT 3.007 (EIS 2 Dimming relative), value: [lighter, darker, stop] 1 byte: DPT 5.001 (EIS 6 percent), value [0 – 100%, step size 0.4%] 3 byte DPT 232.600 RGB, value [R 0 – 255, G 0 – 255, B 0 – 255] 4 byte DPT 12.001 4 byte unsigned as RGBW, value [(0…4 294 967 295): 1st byte = R,2nd byte = G, 3rd byte = B, 4th byte = W]3. Deleting entries:To delete your entry, you must mark it and press the delete button (Del) on your keyboard.USING THE ESF DATA IMPORTTo connect the group addresses of an ESF file (group address file with the extension *.esf), it must beexported directly from the ETS (or from the EIBPORT) beforehand. The following data types are relevantfor all objects of the DUODMX GATEWAY: 1 bit: DPT 1.001 (EIS 1 Switch), value: [0.1] 4 bit: DPT 3.007 (EIS 2 Dimming relative), value: [lighter, darker, stop] 1 byte: DPT 5.001 (EIS 6 percent), value [0 – 100%, step size 0.4%] 3 byte DPT 232.600 RGB, value [R 0 – 255, G 0 – 255, B 0 – 255] 4 byte DPT 12.001 4 byte unsigned as RGBW, value [(0…4 294 967 295): 1st byte = R,2nd byte = G, 3rd byte = B, 4th byte = W]
