USING THE MEMORY FUNCTIONEmbroideryEmbroidering E-47E1b Select the pattern you want to delete.c Press .a Amount of memory used by the pattern to bedeletedb Amount of memory needed to save the currentpatternd Press .* If you decide not to delete the pattern, press .→ The “Saving” screen displays. When the pattern issaved, the display returns to the original screenautomatically.Saving Embroidery Patterns toUSB MediaWhen sending embroidery patterns from themachine to USB media, plug the USB media intothe machine’s USB port.a Press when the pattern you want tosave is in the embroidery screen.Note• Do not turn the main power to OFF while the“Saving” screen is displayed. You will losethe pattern you are saving.Memo• If there is enough memory available afterdeleting the pattern, the pattern you want tosave will be saved automatically. If there isnot enough memory available after deletingthe pattern, repeat the steps above todelete another pattern from the machine’smemory.• It takes a few seconds to save a pattern.• See page E-49 for more information aboutretrieving saved patterns.baMemo• USB media is commercially available, butsome USB media may not be usable withthis machine. Please visit our website formore details.• Depending on the type of USB media beingused, either directly plug the USB deviceinto the machine’s USB port or plug theUSB media Reader/Writer into themachine’s USB port.• The USB media can be inserted or removedat any time except while saving or deleting apattern.
