USING THE SENSOR PENSensor FunctionsBasic operations B-75B2Using the Sensor PenHold the sensor pen, and then touch the point tobe specified. When the tip of the sensor pen ispushed in, the position information is sent to themachine.When using the sensor pen, touch slowly andgently for the definite operation.1) Touch: Touch a point with the sensor pen, thenimmediately lift up the pen.2) Long touch: Touch a point with the sensor penand hold it down for at least one second toactivate the functions that you just selected.Important Information aboutSensor PenThe sensor pen emits the signal to the machine,and then the sensor pen receiver receives thesignal to specify the position.a Sensor pen receiver inside the machineb Signal is waved out from the sensor penUSING THE SENSOR PENNote• Once a point is touched with the sensor penand the entered information is applied in thescreen, perform the next operation.Repeatedly touching a point with the sensorpen may prevent the information from beingcorrectly read.• Do not drag the sensor pen tip on themachine, otherwise the sensor pen tip maybe chipped off.• If there is any problem with the guidelinemarker, the sensor function may notoperate correctly.Memo• The sensor pen can be used to touch on thescreen as a touch pen.CAUTION• Do not insert any object into the sensor penand the receiver, otherwise the machine maybe damaged.IMPORTANT• Do not put your hand, the fabric or any objectbetween the machine and the sensor pen,otherwise the sensor pen receiver may notreceive the ultrasonic wave.• Do not use the machine close to any other unitwhich produces ultrasonic wave or a vibrationsound, otherwise interference may occur.
