UPPER THREADINGB-54l Start sewing.Sample of Twin Needle SewingUsing Threads that UnwindQuickly■ Using the Spool NetIf using transparent nylon monofilament thread,metallic thread, or other strong thread, place theincluded spool net over the spool before using it.When using specialty threads, threading must bedone manually.If the spool net is too long, fold it once to match it tothe spool size before placing it over the spool.■ Using the Vertical Spool PinUse the vertical spool pin when using an irregularlyshaped thread spool, and when sewing orembroidering with metallic thread.a Insert the vertical spool pin onto the bobbinwinder shaft.b Install the spool felt and the thread spool inthat order, and then thread the upperthread.Memo• To change direction when sewing with thetwin needle, raise the needle from thefabric, raise the presser foot lever, and thenturn the fabric.a Spool netb Thread spoolc Spool pind Spool capMemo• When threading the spool with the spool neton, make sure that 5 cm - 6 cm (approx.2 inches - 2-1/2 inches) of thread are pulledout.• It may be necessary to adjust the threadtension when using the spool net.a Bobbin winder shaftb Vertical spool pinc Spool feltd Thread spoolMemo• When setting the thread spool, set it so thatthe thread winds off from the front of thespool.• If using metallic thread, we recommend thatyou use a 90/14 home sewing machineneedle.• Using the vertical spool pin with certaintypes of threads will keep the thread fromtwisting as it comes off the spool pin.dcba
