Operation ECA 45040 Instruction 0024-94003. Use ∧∨ keys to place cursor next to “Edit Test ID”; then press ENTER todisplay the Edit Test ID menu, which shows the first line of each Test IDrecord.Edit Test IDª 0 Customer11 .....2 .....31 .....Note: Five periods (. . . . .) are used to identify empty lines.4. Use ∧∨ keys to choose which Test ID record to edit; then press ENTER todisplay all three lines of that record.Edit Test IDª Customer1AddressBurner Location5. Use ∧∨ keys to choose which of the three Test ID lines to edit; then pressENTER to begin editing that line.6. Use ∧∨ keys to display first desired character. Then press > key to moveto next character position. Repeat this step until line is complete(maximum of 20 alphanumerical characters).7. When finished, press ENTER to save information and move cursor back toleft of screen.8. At this time, either return to Step 5 to choose another line to edit, or endthis procedure by pressing the ESC key as necessary to return to theSetup List screen.2.17.8.2 Select Test IDChoose which pre-entered Test ID to use as follows:1. Press SETUP key to display the Setup List screen.2. Use ∧∨ keys to place the cursor next to “Test ID”; then press ENTER todisplay the Test ID menu.Test IDª Select Test IDEdit Test IDTransmit Test IDClear Test ID
