Bacharach 450 Operating & Maintenance Instructions
                                                                                      | |
Contents
| 
ECA 450 OperationInstruction 0024-9400 413. Use ∧∨ keys to place cursor next to “Select Test ID”; then press ENTER todisplay the Select Test ID menu, which shows the first line of each TestID record.Select Test IDª 0 Customer11 .....2 .....31 .....NO Test IDNote: Five periods (. . . . .) are used to identify empty records.4. Use ∧∨ keys to choose a pre-entered Test ID, or choose “NO Test ID” todeselect a previously chosen record; then press ENTER to make theselection and return to the Test ID menu.Note: NO Test ID is automatically selected when the analyzer isturned on.5. Press ESC to end this procedure and return to Setup List screen.2.17.8.3 Transmit Test IDBefore the Test ID information can be transmitted, a personal computer mustbe connected to the analyzer and set up to receive the data. (refer to Section2.11 Downloading Data to a Personal Computer).Download all pre-entered Test ID records to a personal computer as follows:1. Press SETUP key to display the Setup List screen.2. Use ∧∨ keys to place cursor next to “Test ID”; then press ENTER todisplay the Test ID menu.Test IDSelect Test IDEdit Test IDª Transmit Test IDClear Test ID3. Use ∧∨ keys to place cursor next to “Transmit Test ID”; then pressENTER to start transmitting. At this time the analyzer displays“Transmitting…” while also displaying the Test ID number that iscurrently being transmitted.Transmitting...Test ID #: 0Press ESCAPE to END4. Observe that the computer displays the data as it is being received. Afterall data has been transmitted, the analyzer re-displays the Test ID menu. |
Related manuals for Bacharach 450
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine