Bacharach 450 Operating & Maintenance Instructions
                                                                                      | |
Contents
| 
Operation ECA 45044 Instruction 0024-94002.17.10.1 Changing Display FormatChange the order in which the data is displayed in the Combustion TestHOLD/RUN screen as follows:Note: Changing the order of the Combustion Test Data as displayed on theanalyzer’s front panel does not change the order in which the data is printedor downloaded.1. Press SETUP key to display the Setup List screen.2. Use ∧∨ keys to place cursor next to “Display Format”; then press ENTERto show Display Format screen.Display Formatª Edit FormatReset Format3. Use ∧∨ keys to place cursor next to “Edit Format”; then press ENTER toshow Edit Display Format screen, where the current order of theCombustion Test Data is shown numbered from 0 to 23.Edit Display Formatª 0 O21 CO2 EFF234. Change data shown for a particular location by first using ∧∨ keys toplace cursor next to desired numbered location. Next, press ENTER tomove cursor into that location’s data field; then use ∧∨ keys to choosedesired data to appear at that location. Finally, press ENTER to make theselection and move cursor back to left of screen.5. Change data displayed at other numbered locations by repeating Step 4.6. When finished, press ESC as necessary to return to Setup List screen.2.17.10.2 Resetting Display Format Back to Factory DefaultReturn the display format back to its factory-default order as follows:1. Press SETUP key to display the Setup List screen.2. Use ∧∨ keys to place cursor next to “Display Format”; then press ENTERto show Display Format screen.Display FormatEdit Formatª Reset Format3. Use ∧∨ keys to place cursor next to “Reset Format”; then press ENTER toshow Reset Display Format screen. |
Related manuals for Bacharach 450
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine