ECA 450 MaintenanceInstruction 0024-9400 634.3 Printer Paper ReplacementParts Required:• Replacement Paper Roll (refer to Section 6.1)Procedure:1. Open printer by pressing the printer’s front-panel latch. See Figure 4-2.2. The paper-roll carrier is mounted on the rear of the printer’s front paneland will swing out when the printer is opened.3. Pinch in the two paper-roll clips at end of paper carrier; then removepaper-retainer disk and empty roller from carrier.4. Install a new paper roll and the paper-retainer disk onto the papercarrier.5. With analyzer turned on, position paper at entry point of printer’s feedmechanism. The paper will be sensed by the mechanism and beautomatically fed through the printer and into the proper position forprinting.Tip: To correct for minor paper misalignment, press the printer’s front panelpaper-feed button until the paper self aligns.Figure 4-2. Installing Printer PaperFRONT PANELLATCHPAPER CARRIERPAPER FEEDMECHANISMPAPER ROLLCLIPSPAPER RETAINER
