Banner Q5XKLAF2000-Q8 Instruction Manual

Also see for Q5X: Reference guide Quick start guide Instruction manual Quick start guide Quick start guide

Banner Q5XKLAF2000-Q8 Instruction Manual Manual pdf 5 page image

Output Indicator• On—Output is on• Off—Output is offStability Indicator (STB)• On—Stable signal within the specified sensing range• Flashing—Marginal signal, the target is outside thelimits of the specified sensing range, or a multiplepeak condition exists• Off—No target detected within the specified sensingrangeActive TEACH Indicators (DYN, FGS, and BGS)• DYN, FGS, and BGS all off—Two-point TEACHmode selected (default)• DYN on—Dynamic TEACH mode selected• FGS on—Foreground suppression TEACH modeselected• BGS on—Background suppression TEACH modeselected• DYN, FGS, and BGS all on—Dual TEACH modeselected1.4.2 ButtonsUse the sensor buttons (SELECT)(TEACH), (+)(CH1/CH2), and (-)(MODE) to program the sensor.(SELECT)(TEACH)• Press to select menu items in Setup mode• Press and hold for longer than 2 seconds to start thecurrently selected TEACH mode (the default is two-point TEACH)(+)(CH1/CH2)• Press to navigate the sensor menu in Setup mode• Press to change setting values; press and hold toincrease numeric values• Press and hold for longer than 2 seconds to switchbetween Channel 1 and Channel 2(-)(MODE)• Press to navigate the sensor menu in Setup mode• Press to change setting values; press and hold todecrease numeric values• Press and hold for longer than 2 seconds to enterSetup modeNote: When navigating the menu, themenu items loop.Q5X Laser Triangulation Sensor with Background Suppressionwww.bannerengineering.com - Tel: +1.763.544.3164 5