Installation adjustment mode8-6 5975718 BARCODATA 1209s 050698Scheimpflug Adjustment (Diagonal imagefocusing)DIAGONAL IMAGE FOCUSING to continue to return1. TURN THE SCREW MARKED;;TO FOCUS THE IMAGE DIAGO-NALLY from LEFT (bottom) TORIGHT (top).2. TURN THE SCREW MARKED ;;TO FOCUS THE IMAGE DIAGO-NALLY from LEFT (top) TO RIGHT(bottom)GREEN A3 A4RED A5 A6BLUE A1 A2leftrightleftrightA3A4 A1A2A5A6Loosen first the security screws (see images opposite and above.)Example : diagonal focusing of the green image.Equalize diagonally the focus from left (bottom) to right (top) by turningscrew A3 of the projected colour.Equalize now diagonally the focus from left (top) to right (bottom) byturning screw A4 located under the green lens.5('*5((1%/8($ $ $ $ $ $% % % % % %:$51,1* 72$'-8676&+(,03)/8*&255(&7,216$72$),567/226(17+(&255(6321',1*6(&85,7<1876%72%6&+(,03)/8*$'-8670(17,6/,0,7('352-(&725)52179,(::$51,1* :$51,1* :$51,1*:$51,1* :$51,1* :$51,1* :$51,1* :$51,1*:$51,1* :$51,1*First, be sure that the CRT projection angle is correctly adjusted,otherwise it is not possible to obtain proper overall focus of the image.Press ENTER to start the green adjustment.Press EXIT to return to CRT Projection Angle Adjustment.Adjustment procedure :B5 B6Red CRT LensB4With the diagonal image focusing corrections, it is possible to obtainuniform focus for the total projected image.These corrections must be repeated for each colour. The Diagonalimage focusing is repeated 3 times, first for green, then for red andthen for blue.All manuals and user guides at all-guides.com
