Barco Data 1209s Installation Manual

Also see for BarcoData 1209S: Owner's manual Owner's manual

Gamma correctionsC-15975718 BARCODATA 1209s 050698C GAMMA CORRECTIONSWhen entering the gamma corrections, a warning will be displayed:"RISK OF INCORRECT ADJUSTMENT OF THE PROJECTOR.THE GAMMA CORRECTIONS ARE FACTORY ADJUSTED USINGAN ACTAS COLOR ANALYSER ! THEREFORE, ONLY QUALIFIEDINSTALLATION OR SERVICE PERSONNEL SHOULD PERFORMTHESE ADJUSTMENTS ! "WARNINGRISK OF INCORRECTADJUSTMENT OF THEPROJECTOR.THE GAMMA CORRECTIONS AREFACTORY ADJUSTED USING ANACTAS COLOUR ANALYSER !THEREFORE, ONLY QUALIFIEDINSTALLATION OR SERVICEPERSONNEL SHOULD PERFORMTHESE ADJUSTMENTS ! TO CONTINUE TO RETURN.If you are qualified, press the key to continue.Gamma CorrectionsThree items can be selected inside the "Gamma Corrections" menu:the Blue Gamma Correction, the R & B midlights and the factory preset.To carry out the Blue Gamma Correction :1 Push the control disk up or down to highlight the itemBLUE GAMMA CORRECTION in the menu and then pressENTER.If EXIT is pressed, the projector will return to the Service menu.2 After ENTER is pressed, a text box with message "Adjust witharrow key" will be displayed on the screen.3 Push the control disk up or down to adjust the slope, a text boxwith a bar scale (Min to Max) will be displayed to visualise themagnitude of the correction.4 Push the control disk to the left or to the right to adjust thebreakpoint, a text box with a numeric bar scale (0-99) will bedisplayed to visualise the magnitude of the correction.5 Press ENTER to return to the "Gamma Corrections" menu.GAMMA CORRECTIONSBLUE GAMMA CORRECTIONAdjust slope with È or ÍBreakpoint with Á or ËR & B MIDLIGHTSAdjust red with È or Íblue with Á or ËFACTORY PRESETSelect with È or Íthen ; to return.Adjust with arrow keyMin MaxBLUE GAMMASLOPEBLUE GAMMABREAKPOINT50All manuals and user guides at all-guides.com

/ 41

Related manuals for Barco BarcoData 1209S