Barco R9002370 Owner's Manual

R5975809 BARCO CINE 6 ___________________________________________________________________________________ 6-5Random Access Adjustment ModeRaster Shift AdjustmentThe green raster must be centered both horizontally and vertically on the center of the CRT surface. To center the green raster,look into the green lens and use the arrow keys on the RCU to move the raster.CAUTION :It is necessary to look into the lenses to perform these adjustments. To avoid eye discomfort while looking into the lenses, reducethe contrast and gradually increase the brightness level until the raster becomes visible on the face of the CRT.ENTER will select green raster shift adjustment.EXIT returns to Random Access Adjustment modemenu. Select with orGEOMETRYRASTER SHIFTLEFT-RIGHT (E-W)TOP-BOTTOM(N-S)H & V SIZEV LINEARITYBLANKINGthen to returnENTER continues to geometry menuUse Right arrowto correctUse Left arrowto correct50H PHASE><50H PHASE><For external sources :If the raster shift is correctly adjusted, the H Phase text box is projected in the lower center of the raster. At that moment, the' >< ' icon indicates the center of the raster.Adjust the H phase control until the middle of the projected image is equal with the center of the ' >< ' icon.Note : If the genlocked pattern was selected, the external source will be displayed.A bar scale and a value (between 0 and 100) on the screen give a visual indication of the horizontal phase adjustment.