Barco R9002370 Owner's Manual

Safety Instructions1 - 2 ___________________________________________________________________________________ R5975809 BARCO CINE 6A. Mains lead (Power cord) with CEE 7 plug:The wires of the mains lead are colored in accordance with the following code.Green & Yellow : Earth (safety earth)Blue : NeutralBrown : Line (live)B. Power cord with ANSI 73.11 plug:The wires of the power cord are colored in accordance with the following code.Green / Yellow : GroundWhite : NeutralBlack : Line (live)FEDERAL COMMUNICATION COMMISSION (FCC STATEMENT)This equipment has been tested and found to comply with the limits of a class A digital device, pursuant to Part 15 of the FCCRules and EN55022.These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in acommercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and usedin accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipmentin a residential area is likely to cause harmful interference in which case the user will be required to correct the interferenceat his own expense.Note : The use of shielded cables is required to comply within the limits of Part 15 of FCC rules and EN55022μ All the safety and operating instructions should be read before using this unit.μ The safety and operating instructions manual should be retained for future reference.μ All warnings on the equipment and in the documentation manuals should be adhered to.μ All instructions for operating and use of this equipment must be followed precisely.On safety1. This product should be operated from an AC power sourceOperating AC power voltage of the projector:BARCO CINE 6 : Art. No. R9002370 (230 V AC)Art. No. R9002379 (120 V AC)The projector leaves the factory for 230 V AC. Consult your dealer to switch over to 120 V AC.If you are not sure of the type of AC power available, consult your dealer or local power company.2. This product is equipped with a 3-wire grounding plug, a plug having a third (grounding) pin. This plug will only fit intoa grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact yourelectrician to replace your obsolete outlet. Do not defeat the purpose of the grounding-type plug.WARNING FOR THE CUSTOMERS : THIS APPARATUS MUST BE GROUNDED (EARTHED) via the supplied 3 conductor AC powercable. (If the supplied power cable is not the correct one, consult your dealer.)3. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. Todisconnect the cord, pull it out by the plug. Never pull the cord itself.4. If an extension cord is used with this product, make sure that the total of the ampere ratings on the products pluggedinto the extension cord does not exceed the extension cord ampere rating. Also make sure that the total of all productsplugged into the wall outlet does not exceed 15 amperes.5. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or shortout parts that could result in a risk of fire or electrical shock.Never spill liquid of any kind on the product. Should any liquid or solid object fall into the cabinet, unplug the set and haveit checked by qualified service personnel before resuming operations.6. Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and unusedfor long periods of time, unplug it from the wall outlet. This will prevent damage to the projector due to lightning and ACpower-line surges.