Service Mode7 - 8 ___________________________________________________________________________________ R5975809 BARCO CINE 6R & B convergence midWhen "R & B convergence mid" is selected, all convergence settings for red and blueare set to midposition. Item is password protected.Push the cursor key È or Í to highlight 'R & B Convergence Mid'.Press ENTER to select.A confirmation screen will be displayed first.Press ENTER to confirm.Press EXIT to cancel the procedure.Undo R & B convergence midWhen "R & B convergence mid" is selected, all convergence settings are set to theirmidposition. With the undo, it is possible to return to the previous settings as long asthe projector is playing on the same source (= same adjustment block).'Undo R & B convergence mid' is displayed in the Memory management menu insteadof 'R & B convergence mid' when this latter is pressed.Push the cursor key È or Í to highlight 'Undo R & B convergence mid'.Press ENTER execute the undo function.Again a confirmation screen will be displayed first.Press ENTER to confirm.Press EXIT to cancel the procedure.MEMORY MANAGEMENTor to returnthen Select withCOPY A BLOCKDELETE A BLOCKDELETE ALL BLOCKSALL SETTINGS TO MIDPOSR & B CONVERGENCE TO MIDMEMORY MANAGEMENTor to returnthen Select withCOPY A BLOCKDELETE A BLOCKDELETE ALL BLOCKSALL SETTINGS TO MIDPOSUNDO R & B CONVERGENCE TO MIDCONVERGENCE OFF to cancel to Confirmconvergence settingin current blockwill be overwritten !CONVERGENCE OFF to cancel to Confirmconvergence settingin current blockwill be overwritten !