Barco R9002370 Owner's Manual

Service Mode7 - 2 ___________________________________________________________________________________ R5975809 BARCO CINE 6Projector Set-upHighlight PROJECTOR SET-UP with the arrow keys and then press ENTER, to display the projector Setup menu.Within the projector setup menu, the following items can be setup :- Identification- Total run time- Change password- Change language- Change projector address- Change baud rate- Powerup mode- Common address- Barco logoIdentificationHighlight IDENTIFICATION using the arrow keys and then press ENTER.The Identification screen displays information concerning :- Projector address. : To change the address of your projector,contact a qualified service technician.- Software version.- Configuration.Possible configurations :Front ceilingFront tableRear ceilingRear table- Baud rate PC. : Transfer speed for communication with an IBM PC or MAC. The Baud rate of the projector must be thesame as that of the connected computer. When there is a difference, contact a qualified service technician to make therequired changes.- Text on/off. : Indicates in operational mode if the bar scale and value will be displayed and if warnings will be displayed.ON : displayedOFF : not displayedThe status can be changed by pressing the TEXT key once on the RCU.- Serial No. : Indicates the manufacturing serial number of the projector. This number can be useful when technicalassistance is required.SERVICE MODEMEMORY MANAGEMENTCOMMON SETTINGSI2C DIAGNOSTICSor to returnthen Select withPROJECTOR SET-UPPROJECTOR SET-UPor to returnthen Select withTOTAL RUN TIMECHANGE PASSWORDCHANGE LANGUAGECHANGE PROJECTOR ADDRESSCHANGE BAUD RATEPOWERUP MODE : StandbyCOMMON ADDRESSBARCO LOGOIDENTIFICATIONCine 6PROJ. ADDRESS : 0SOFT. VERSION : 1.01CONFIG. : front /tableBaud Rate PC : 9600Text : onSerial No. : 10359852