R5911443 /02 UDM 101Image 8-673. If you want CLO mode to be active, click Enable underneath Constant light output.8.10 Scaling modesAbout scaling modesWhile the default mode of projection is to fill the screen while respecting the aspect ratio (fill aspect), it is alsopossible to stretch the image in a different way. You can choose from one of the following scaling methods:Scaling Mode Explanation Example image1Fill aspect Default scaling mode.Stretches the image to the native resolution of theDMD, while respecting the original aspect ratio.1:1 An exact rendering of the source signal, which may besmaller than the native resolutionFill screen Fills the screen to the screen size defined in the ScreenSize menu, while respecting the original aspect ratio.For more info on adjusting the Screen Size menu, see“Warping – Screen Size”, page 82.Stretch This mode stretches the image to the screen sizedefined in the Screen Size menu, while ignoring theoriginal aspect ratio. For more info on adjusting theScreen Size menu, see “Warping – Screen Size”, page82.Setting a scaling mode1. In the main menu, select Installation → Scaling.GUI – Installation1: Example using a screen of 2,35:1, an input signal of 4:3 and a projector with a native resolution of 3840 x 2400
