R5911443 /02 UDM 123Image 10-19: DMX menu2. Choose the desired DMX mode.3. Choose the desired starting channel.4. Choose whether or not you want the Auto power-down feature to be enabled. If enabled, determine the time-out.5. If required, enable Art-Net. If enabled, determine the desired Art-Net Universe and Art-Net channel.6. If a front XLR connector is available on your projector, you can enable the output voltage on this connector.10.5 Front XLR output voltage controlWhat can be done?The output voltage on the front XLR connector can be enabled or disabled. If enabled, the output voltage levelcan be set to 0 V, 12 V or 24V.The output voltage depends on the application or peripheral used. For example, the optional externalmechanical shutter requires 12 V. The motorized rigging frame on the other end requires 24 V.DMX Art-Net can also enable the output voltage on the front XLR connector. To avoid that per accident avoltage is activated via DMX Art-Net, set the power level to 0 V.How to enable or disable?1. In the main menu, select System Settings → Communication → DMX.Image 10-20: Communication menu, DMXThe DMX menu is displayed.GUI – System Settings
