Baumer PF55S Operation Manual

1. Make sure you have a Type A to B USB cable available forconnection.2. Connect Port A of the USB cable to a free USB port on thePC.3. Unscrew the cover at the top of the transmitter of the flowsensor.ð The USB Port B of the flow sensor is freely accessible.4. Connect Port B of the USB cable to the USB port of the flowsensor.ð The flow sensor is connected to the PC via USB.n The BCP software can be installed on the PC with alldrivers.Ä 6.2 “BCP software installation” on page 42n The flow sensor can be configured.Ä 7.1 “BCP Software” on page 476.2 BCP software installationPersonnel: n OperatorThe flow sensor must be connected to a PC via the USB port.The PC must have a functioning Internet connection to install theBCP software with all drivers.Ä 6.1 “Create USB interface” on page 41NOTICE!Faulty installation possible due to firewall or virusprotection programThe BCP software can be incorrectly recognized orblocked by the firewall or the virus protection programas malware.In this case, the BCP.exe file must be released man-ually in the firewall or the virus protection program.CommissioningBCP software installation05.03.2020Flow sensor PF55S42