Baumer PF55S Operation Manual

7.3 Quick start menuThe quick start menu provides quick access to some of the mostcommonly used functions.Pressing the Enter button opens the quick start menu.The quick start menu can be activated in the Displaymenu.Ä 7.6.9 “Display menu” on page 80Using the BCP software, the quick start menu can beadapted to the respective application.Ä 7.6.12.1 “System menu - additional BCP com-mands” on page 88The main menu is also available with all functions:Ä “Main menu” on page 587.4 Access codesAccess to the menus and functions of the flow sensor is providedby 6 grouped password levels. Each password level is protected bya different code.The access code must be entered when opening the quick startmenu or the main menu.The following access codes are set at the factory:L1 10000000 L4 40000000L2 20000000 L5 57291624L3 30000000 L6 65940123The access codes can be changed in the System menu.Ä 7.6.12 “System menu” on page 87Different menus or functions are available depending on theaccess code. Menus and functions for higher password levels aregrayed out or are not displayed.In order to be able to make necessary settings, the access code ofthe higher password level must be entered beforehand.If the function Restr.access is activated, then only menus andfunctions can be accessed which correspond exactly to the level ofthe access code.If the Restr.access function is disabled, then the menus andfunctions corresponding to the level of the access code and all thelower password levels can be accessed.OperationAccess codes05.03.2020 Flow sensor PF55S 53