238238238cab Produkttechnik GmbH & Co KGH - Heat, Speed, Method of Printing, RibbonThis command sets printing heat, speed and the method of printing for the current label.Print quality is influenced by the used material and by the print heat and print speed.H speed[,h][,t][,r][,Bb]CRH - Heat, speed, method of printing, ribbonspeed = Print speed in millimeters or inchesThese values depend on the printer type, please see theoperator´s manual for details. A „wrong“ value willautomatically rounded by the printer to the next possible value.h = Heat setting (-10 up to +10)t = Type: T=Transfer, D= Direct thermal (Default: T)r = Ribbon saver on/off R0=off, R1=on *b = Back feed speed in millimeters or inchesH 150,0,D,R1Sets print speed to 150mm/s , Heat setting zero, Direct thermal mode and switches the ribbon saveron. (The printer must be equipped with a ribbon saver to use this option)The maximum print speed depends on the used printer model. The print speed is automatically set tothe maximum if accidentially a higher printspeed is transmitted.* The functionality of the ribbon saver command depends on the used printer model and the availablityof a ribbon saver.Example:Syntax:
