727272cab Produkttechnik GmbH & Co KGe - erase dataThe e command is used to erase data from the printer´s memory (RAM), such as fonts and graphics.Data on the memory card will not be affected by this sequence. Separate commands are availablefor erasing files from the memory card. ( see also the „M“ commandlater in this manual )e type;nameCRe - erase data commandtype = The file types being removed, with following valid fileextensions:Images: BMP, GIF, IMG, MAC, PCX, PNG, TIFFonts: FNT, TTF.(FNT can be used for all font types and IMG can be used forall picture types)name = The name attached to the font or graphic when it wassent to the printer. A wildcard ( * ) may be used todelete all files of the same type. "name" is not case sensitive.e FNT;*Erases all true type fonts which are currently in the printer’s memory.e IMG;logoErases the picture with the name "logo" in the printer´s memoryThe printer keeps the received graphic fles in its internal memory until it will be switched off or untilthese files will be erased or overwritten.Example:Example:Syntax:
